|
Process Security Management
Course Description
Over the past 10 years, OSHA's Process Safety Management
(PSM) Standard and EPA's Risk Management Program (RMP) Rule have resulted in
improvements in managing releases of highly hazardous chemicals. In
complying with these standards, companies have focused mostly on accidental
releases. However, these regulations do not specifically exclude releases
from deliberate acts. These acts can include external threats of
terrorism, sabotage, vandalism and theft. Indeed, in a Fact Sheet on Site
Security, referencing the PSM standard, EPA states "External threats
must be considered when conducting a process hazard analysis." Unless
properly managed, it is entirely possible that risk from deliberate acts
could dominate that from accidental releases. This course deals with
managing the risk from deliberate acts.
Recent events have emphasized the need for process
security programs and both government and industry are acting to remedy
current shortfalls in process security. This course describes a
comprehensive program for process security management that parallels process
safety management (PSM) programs which address accidental releases of
hazardous materials. Such process security management programs can reduce
both the likelihood and the severity of terrorist and criminal acts.
Modeling process security management on process safety
management offers numerous benefits. A considerable amount of development
work has been performed and experience accumulated on PSM programs since
OSHA’s PSM standard was enacted in 1992. Most process companies invest
significant resources in their PSM programs and value them highly.
Modification of an existing program to address process security is easier
and more efficient than developing a completely new program. Furthermore,
many companies already have in place elements of process security that can
be integrated readily into an overall program.
While PSM programs provide the framework for a
comprehensive process security management program, there are numerous
significant differences that require modifications and additions to the PSM
framework to accommodate process security. This course presents an overall
process security management program and describes these differences.
Detailed guidelines are provided for implementing each of the elements of
the program.
Course is only available for In-House training.
Objective
To identify and develop an understanding of threats to
process facilities from terrorism, sabotage, vandalism and theft and provide
guidance in performing a threat and vulnerability analysis, as well as
inspections and auditing of a facility's current vulnerability level.
Target Audience
This course is intended for process safety and security
personnel, and others who may be responsible for managing the risk of
threats to process facilities. Plant or company managers looking to gain
more understanding of threats and methods use to manage them at their
facilities would also benefit from taking this course.
Prerequisite
A general background in process safety, risk management
and/or security at manufacturing facilities is beneficial. This
course is open only to those individuals who are employees of process
companies operating in the United States or who work for US Government
agencies.
Course Contents
-
Overview
-
Industry and government activities
-
Pending legislation and regulations
-
Management systems for process security
-
Coordination with law enforcement and other
organizations
-
Employee involvement and security awareness
-
Process security information
-
Risk assessment
-
Security Measures and Safeguards
-
Security procedures
-
Training
-
Systems integrity
-
Management of change
-
Incident reporting and investigation
-
Emergency response and crisis management
-
Reviews, audits and inspections
-
Legal and insurance issues
Duration / CEUs
-
Two days
-
1.4 CEUs awarded
|
|
|
|
Brochures / Information Request
For more information, please
contact our Manager of Training Services at
614-841-9800 or via email at
training@primatech.com.
Training
Discount Offers
Attend both of these courses in the same week
for a total cost of $1,600 (savings of $390). Normal price would
be $995 per course or $1,990. For more information and
additional training discount offers,
see
Information on Pricing and Registration - USA.
Upcoming Training Courses
(By Month)
March
-
Management of Change (MOC) for Process Safety - 1 day ($595) -
March 2, Denver, CO
-
Mechanical Integrity (MI) for Process Safety and Risk Management -
3 day ($1,495) -
March 3-5, Denver, CO
-
PHAWorks Software Tips and Tricks - 1 day ($595)
- March 8, Houston, TX
-
Refresher Training for Process Hazard Analysis (PHA) Team Leaders - 2 days
($995)
- March 9-10, Houston, TX
-
Layers of Protection Analysis (LOPA) for
Process Safety Management (PSM) -
3 days ($1,795) - March 8-10,
Houston, TX
-
Using
Tracker Software - 3 days ($1,795) - March 9-11, Columbus, OH
-
Advanced
Process Hazard Analysis (PHA) for Team Leaders - 2 days ($995) -
March 11-12, Houston, TX
-
Job Hazard / Safety Analysis - Assessing
Workplace Hazards - 1 day
($595)
-
March 29, Houston, TX
-
Process Hazard Analysis (PHA)
for Team Leaders - 5 days ($2,995)
-
March 29-April 2, Orlando, FL
-
Principles of Procedure Writing - 2 days
($995)
-
March 30-31, Houston, TX
April
May
-
Understanding and Applying Human Factors for Process Safety
- 1 day ($595) -
May 17, Orlando, FL
-
Designing and Implementing a
Process Safety Management (PSM)
Program -
2 days (USA - $995):
-
Auditing
Process Safety Management (PSM)
Programs - 2 days (USA - $995):
-
Process Hazard Analysis (PHA)
for Team Leaders - 5 days ($2,995) -
May 17-21, Chicago, IL
-
Process Hazard Analysis (PHA) for Team Members - 2 days
($995) - May 25-26, Houston, TX
-
PHAWorks Software Training - 1.5 days
($1,195) -
May 11-12, Houston, TX
Training Courses (By Title)
Process Hazard Analysis (PHA) for Team Leaders
top
Process Hazard Analysis (PHA) Training
Courses
-
PHAWorks Software Tips and Tricks - 1 day ($595)
-
Refresher Training for Process Hazard Analysis (PHA) Team Leaders - 2 days
($995)
-
March 9-10, Houston, TX
-
July 13-14, Philadelphia, PA
-
November 2-3, Houston, TX
-
Advanced
Process Hazard Analysis (PHA) for Team Leaders - 2 days ($995)
-
March 11-12, Houston, TX
-
July 15-16, Philadelphia, PA
-
November 4-5, Houston, TX
-
Process Hazard Analysis (PHA) for Team Members - 2 days
($995)
top
Process Safety Management
(PSM) Training Courses
-
Understanding and Applying Human Factors for Process Safety
- 1 day ($595)
-
May 17, Orlando, FL
-
July 19, Chicago, IL
-
October 25, Houston, TX
-
Designing and Implementing a
Process Safety Management (PSM)
Program -
2 days ($995)
-
Designing and Implementing a
Process Safety Management (PSM)
Program -
2 days (International Deliveries)
See
Information on Pricing and Registration - International
as
price varies based on location
-
Auditing
Process Safety Management (PSM)
Programs - 2 days ($995)
-
Auditing
Process Safety Management (PSM)
Programs - 2 days (International Deliveries)
See
Information on Pricing and Registration - International
as
price varies based on location
-
Job Hazard / Safety Analysis - Assessing
Workplace Hazards - 1 day
($595)
-
March 29, Houston, TX
-
October 4, Houston, TX
top
S84
/ IEC 61511,
Layers of Protection Analysis (LOPA) and
Safety Integrity Level (SIL) Courses
-
Layers of Protection Analysis (LOPA) for
Process Safety Management (PSM) -
3 days ($1,795)
-
March 8-10, Houston, TX
-
June 15-17, Philadelphia, PA
-
November 9-11, Houston, TX
-
Layers of Protection Analysis (LOPA) for
Process Safety Management (PSM) -
3 days (International Deliveries)
See
Information on Pricing and Registration - International
as
price varies based on location
-
April 20-22, Amsterdam, The Netherlands
-
December 14-16, Singapore, Republic of Singapore
-
Using LOPAWorks Software - 1 day (Description coming soon) -
$595
-
S84 / IEC 61511 Standard on Safety Instrumented Systems (SIS) and the
Development of a Safety Requirements Specification (SRS) - 1 day
($595)
-
Safety Integrity Level (SIL) Verification for the S84 /
IEC 61511 Standard
on Safety Instrumented Systems (SIS) - 3 days ($1,795)
-
June 22-24, Philadelphia, PA
-
November 16-18, Houston, TX
top
Software Courses
-
PHAWorks Software Training - 1.5 days
($1,195)
-
January 20-21, New Orleans, LA
-
May 11-12, Houston, TX
-
August 18-19, Chicago, IL
-
November 3-4, Las Vegas, NV
-
Using
Tracker Software - 3 days ($1,795)
-
March 9-11, Columbus, OH
-
June 8-10, Columbus, OH
-
September 14-16, Columbus, OH
-
November 30 - December 2, Columbus, OH
-
Using LOPAWorks Software -
1 day (Description coming soon) - $595
top
Job
Safety Analysis /
Procedure
Writing Courses
-
Job Hazard / Safety Analysis - Assessing
Workplace Hazards - 1 day
($595)
-
March 29, Houston, TX
-
October 4, Houston, TX
-
Principles of Procedure Writing - 2 days
($995)
-
March 30-31, Houston, TX
-
October 5-6, Houston, TX
-
Advanced Procedure Writing - 2 days
($995)
-
April 1-2, Houston, TX
-
October 7-8, Houston, TX
top
Management of Change (MOC) and Mechanical Integrity
(MI) Courses
top
Cyber Security Courses
-
Understanding and Applying Cyber Security for Manufacturing
and Computer Control Systems - 2 days ($1,195)
-
February 2-3, Washington, D.C.
-
August 3-4, Atlanta, GA
-
December 14-15, Houston, TX
-
Cyber Security Vulnerability Analysis for Manufacturing and
Computer Control Systems - 2 days ($1,195)
-
February 4-5, Washington, D.C.
-
August 5-6, Atlanta, GA
-
December 16-17, Houston, TX
top
Human Factors
and Human Errors Courses
-
Human Factors
Methods for Process Safety -
1 day ($595)
-
Understanding and Applying Human Factors to Control Systems -
2 days ($1,195)
-
January 19-20, Las Vegas, NV
-
June 15-16, Chicago, IL
-
November 2-3, Houston, TX
-
Human Error and Reliability Analysis - 2 days
($1,195)
-
January 21-22, Las Vegas, NV
-
June 17-18, Chicago, IL
-
November 4-5, Houston, TX
top
Courses Offered for In-House Delivery Only
Process Hazard Analysis (PHA) Training
Risk
Management Program (RMP) Training
Process
Security Training
Other
Technical Training
Courses delivered in-house can be customized
to include your specific process examples and drawings. For more
information about training courses, contact us at
training@primatech.com, by fax at
1-614-841-9805 (any time), or call us at 1-614-841-9800. You can
also click on any of the above links for additional information.
top |
|
|
|
|
