|
Probability and Frequency Analysis
Course Description
This course explains how numerical estimates can be
made of the frequency of accidents and the probabilities of the events
that contribute to them. The propagation of uncertainties in input data
through the analyses is explained. Sensitivities of the evaluations to the
input data are described. Ways in which the data developed are used in
decision making are described.
Workshop sessions are conducted as an integral part of
this course.
Course is only available for In-House training.
Target Audience
Process safety personnel who need to understand how to
evaluate the frequencies of accidents and the probabilities of events that
contribute to them.
Prerequisite
A degree in an engineering or scientific discipline is
desirable for course attendees. Mathematical skills in probability and
statistics are useful. Attendees should bring a scientific calculator to
the course.
Course Contents
-
Overview
-
Objectives
-
Benefits
-
Uses
-
Definition of Terms
-
Limitations
-
Use of Historical Data
-
Fault Tree Analysis
-
Quantification of Fault Trees
-
Dependent Failure Modeling
-
Pitfalls of Fault Tree Analysis
-
Event Tree Modeling
-
Failure Rate Data
-
Uncertainty and Sensitivity Analysis
-
Use of Probabilities and Frequencies in Decision
Making
Duration
One day, 0.7 CEUs awarded
|
|
|
Courses, Prices and Schedule
|
“This training was thorough,
concise and very enjoyable.”
- Mario Urias, Kinder Morgan
|
|
Process Hazard Analysis (PHA) for Team Leaders
|
“Excellent course, the depth and coverage fit my needs
perfectly.”
-
Andy Engels, Praxair Inc.
“Anyone in the chemicals industry
should take this course.”
-
James Sullivan, BASF Corporation
“Course was very good and covered OSHA & EPA
requirements well. Recommend to anyone who has chemicals
onsite to attend.”
- Gary O’Hern, REC
Silicon |
top
Process Hazard Analysis (PHA) Training
Courses
-
PHAWorks Software Tips and Tricks - 1 day
-
August 4, Chicago, IL
-
October 13, Houston, TX
-
Refresher Training for Process Hazard Analysis (PHA) Team Leaders - 2 days
-
January 14-15, Houston, TX
-
June 2-3, Houston, TX
-
August 5-6, Chicago, IL
-
October 14-15, Houston, TX
-
Advanced
Process Hazard Analysis (PHA) for Team Leaders - 2 days
-
January 16-17, Houston, TX
-
June 4-5, Houston, TX
-
August 7-8, Chicago, IL
-
October 16-17, Houston, TX
-
Process Hazard Analysis (PHA) for Team Members - 2 days
-
April 1-2, Houston, TX
-
August 12-13, Chicago, IL
-
December 9-10, Houston, TX
top
Process Safety Management
(PSM) Training Courses
|
“Even after 10+ years, dealing
with PSM/RMP, this course provided tid-bits of
information and additional food for thought…good for
those new to these principles, as well as “old-dogs”
like me.
-
Michelle Maxwell, Reichhold “Excellent compilation of
information on all aspects of PSM. Information provided
can be used to improve PSM at Petrojam;
ideas as to how
I can make a difference have been clearly identified.”
- Chevril Wallace,
Petrojam Ltd.
“A must for anyone who wants to perform compliance
audits or may expect one.”
- Jason Ebin, Dover
Chemical |
-
Designing and Implementing a
Process Safety Management (PSM)
Program -
2 days
-
April 29-30, Houston, TX
-
June 2-3, Orlando, FL
-
August 14-15, Chicago, IL
-
October 27-28, Las Vegas, NV
-
December 11-12, Houston, TX
-
Auditing
Process Safety Management (PSM)
Programs - 2 days
-
Understanding and Applying Human Factors for Process Safety
- 1 day
top
S84
/ IEC 61511,
Layers of Protection Analysis (LOPA) and
Safety Integrity Level (SIL) Courses
|
“Great course!
Helps a novice become expert using working
exercises.”
- Vario
Corsetti, Praxair Inc.
|
-
S84 / IEC 61511 Standard on Safety Instrumented Systems (SIS) and the
Development of a Safety Requirements Specification (SRS) - 1 day
-
February 18, Houston, TX
-
August 6, Houston, TX
-
November 3, Houston, TX
-
Layers of Protection Analysis (LOPA) for
Process Safety Management (PSM) - 2 days
-
February 19-20, Houston, TX
-
April 24-25, London, UK
-
See International Course Description
-
August 7-8, Houston, TX
-
September 25-26, Amsterdam,
The Netherlands -
See International Course Description
-
November 4-5, Houston, TX
-
December 18-19, Singapore,
Republic of Singapore -
See International Course Description
-
Safety Integrity Level (SIL) Verification for the S84 /
IEC 61511 Standard
on Safety Instrumented Systems (SIS) - 2 days
top
Software Courses
|
“Very good and qualified
instructor.
Sensitive to audience needs (for Primatech software
training).”
- Mark Prude, ISP Chemicals
|
top
JSA,
Procedure
Writing Courses
|
“The course gave me the knowledge
skill and confidence to write, very good operating
procedures.”
- Dave
Rossi, TEPPCO “The JHA course is
very informative and will help greatly in the continued
success of our JHA Program.”
- Jeff Brown,
EES Coke Battery
"If you ever wonder what is necessary
to improve or meet requirements, take this class and
learn from an expert."
- Susan Stotts, BP America |
top
Management of Change (MOC) and Mechanical Integrity
(MI) Courses
|
“I signed up for this course to
gain insight and become familiar with the requirements
and documents needed (codes and standards) to develop
and implement a mechanical integrity program.
My mission was accomplished.”
- Carol
Jack, Aerojet Fine Chemicals
|
top
Cyber Security Courses
|
“This course was an excellent
introduction to methods and principle of the C.S.V.A
process.”
-
Raymond Gray, Noveon/Lubrizol
|
top
Human Factors
and Human Errors Courses
|
“Very informative and eye opening.
Leaves you waiting to know more (about Human Factors).”
-
Everett Smith, Kaneka Texas Corporation
|
top
Courses Offered for In-House Delivery Only
Courses delivered in-house can be customized
to include your specific process examples and drawings. For more
information about training courses, contact us at
training@primatech.com, by fax at
614-841-9805 (any time) or call us at
614-841-9800,
8:30 AM - 5:00 PM EST. You can
also click on any of the above links for additional information.
top |
|
|
|
|
