|
Designing and Implementing a Process Safety Management
(PSM) Program
|
"A very good and comprehensive
course. Well worth the time investment"
-
Daniel Guzzle, Sr.,
Rentech Energy Midwest
"Excellent overview course for PSM Elements and
management system. Good take away materials"
-
Catherine Sprigg,
AOC, L.L.C
"Excellent compilation of
information on all aspects of PSM. Information provided
can be used to improve PSM at Petrojam;
ideas as to how I can make a difference have been
clearly identified."
- Chevril Wallace,
Petrojam Ltd. |
Course Description
OSHA's PSM Standard (29 CFR 1910.119) and EPA's Risk
Management Program rule (40 CFR Part 68) both require the development and
implementation of a program to prevent catastrophic accidents for covered
processes. These are performance-based regulations and are subject to
ongoing interpretations and clarifications from the regulatory agencies.
The prevention programs are wide-ranging and cover virtually every aspect
of a company's operations. Companies are often unsure on what constitutes
full compliance with the regulations.
This course explains how to ensure your prevention
program is designed to meet the requirements of these performance-based
regulations and implemented through an effective management system.
Documented examples are provided and discussed and
workshops are used to enhance understanding of the details of
implementation for key PSM elements.
Objective
Provide an understanding of what is required for
compliance with PSM regulations and guidance on how to ensure programs are
properly implemented.
Target Audience
Managers, process safety and risk management
coordinators and others responsible for satisfying OSHA PSM regulatory
requirements.
Prerequisite
None
Course Contents
-
Introduction
-
Overview of
Prevention Program Regulations
-
Requirements
for Compliance
-
Employee
Participation
-
Process
Safety Information
-
Process
Hazard Analysis
-
Operating
Procedures
-
Training
-
Contractors
-
Pre-Startup
Safety Review
-
Mechanical
Integrity
-
Hot Work
Permit
-
Management
of Change
-
Incident
Investigation
-
Emergency
Planning and Response
-
Compliance
Audits
-
Trade
Secrets
-
Management
Systems for Implementation of Prevention Programs
Duration / CEUs / ABIH
Tuition
See
Information on Pricing and Registration - USA for pricing and
registration information.
|
|
|
For more information about training courses,
contact us at
training@primatech.com,
by fax at 1-614-841-9805 (any time), or call us at
1-614-841-9800.
|
Brochures / Information Request
For
more information, please
contact our Manager of Training Services at
614-841-9800 or via email at
training@primatech.com.
Upcoming Training Courses (By Month)
January 2012 (USA
Deliveries)
February 2012 (USA
Deliveries)
-
Understanding IEC 61511 / ISA 84 and
Developing a Safety Requirements Specification- 1 day ($595) -
February 14, 2012 - Houston, TX
-
Safety Integrity Level (SIL) Verification
for Safety Instrumented Systems -
3 days ($1,795) - February 15-17, 2012 - Houston, TX
-
Understanding and Applying Cyber Security for Manufacturing
and Computer Control Systems - 2 days ($995) -
February 14-15, 2012 - Washington, D.C.
-
Cyber Security Vulnerability Analysis for Manufacturing and
Computer Control Systems - 2 days ($995) -
February 16-17, 2012 - Washington, D.C.
-
Process Hazard Analysis (PHA)
for Team Leaders - 5 days ($2,995) -
February 20-24, 2012 - Las Vegas, NV
-
Layers of Protection Analysis (LOPA) for
Process Safety Management (PSM)
-
3 days ($1,495) -
February 22-24, 2012 - Houston, TX
March 2012 (USA Deliveries)
-
Understanding and Applying Human Factors for Process Safety
- 1 day ($595) -
March 5, 2012 - Houston, TX
-
Designing and Implementing a
Process Safety Management (PSM)
Program -
2 days ($995) -
March 6-7, 2012 - Houston, TX
-
Understanding and Applying Human Factors to Control Systems
- 2 days ($995) -
March 6-7, 2012 - Houston, TX
-
Human Error and Reliability Analysis - 2 days ($995) -
March 8-9, 2012 - Houston, TX
-
Auditing
Process Safety Management (PSM)
Programs - 2 days ($995) -
March 8-9, 2012 - Houston, TX
-
PHAWorks
Software Training - 1.5 days ($1,245) -
March 13-14, 2012 - Houston, TX
-
Process Hazard Analysis (PHA)
for Team Leaders - 5 days ($2,995) - March 19-23, 2012 -
Houston, TX
-
Using Tracker Software - 3 days ($1,795) -
March 21-23, 2012 - Columbus, OH
-
Management of Change (MOC) for Process Safety - 1 day ($595)
- March 26, 2012 - Houston, TX
-
Mechanical Integrity
(MI) for Process Safety and Risk
Management - 3 day ($1,495) - March 27-29, 2012 - Houston, TX
-
Refresher Training for Process Hazard Analysis (PHA) Team
Leaders - 2 days ($995) -
March 27-28, 2012 - Houston, TX
-
Advanced Process Hazard Analysis (PHA) for Team Leaders - 2
days ($995) -
March 29-30, 2012 - Houston, TX
March 2012 (International
Deliveries)
See
Information on Pricing and Registration - International as
price varies based on location
Training Courses (By Title)
Process Hazard Analysis (PHA) for Team
Leaders
-
Process Hazard Analysis (PHA)
for Team Leaders - 5 days ($2,995)
-
January 23-27, 2012 - Houston, TX
-
February 20-24, 2012 - Las Vegas, NV
-
March 19-23, 2012 - Houston, TX
-
April 23-27, 2012 - Orlando, FL
-
May 14-18, 2012 - Chicago, IL
-
June 25-29, 2012 - Houston, TX
-
July 23-27, 2012 - Philadelphia, PA
-
August 13-17, 2012 - Houston, TX
-
September 17-21, 2012 - Houston, TX
-
October 22-26, 2012 - New Orleans, LA
-
November 12-16, 2012 - Las Vegas, NV
-
December 3-7, 2012 - Houston, TX
Process Hazard Analysis (PHA)
for Team Leaders - 5 days (International
Deliveries)
See
Information on Pricing and Registration - International
as price varies based on location
-
March 11-15, 2012 - Doha, Qatar
-
April 23-27, 2012 - Amsterdam, Netherlands
-
June 11-15, 2012 - Mexico City, Mexico
-
September 10-14, 2012 - Kuala Lumpur, Malaysia
-
November 5-9, 2012 - London, UK
-
December 3-7, 2012 - Singapore, Singapore
top
Process Hazard Analysis (PHA)
Training Courses
-
Refresher Training for Process Hazard Analysis (PHA) Team
Leaders - 2 days ($995)
-
March 27-28, 2012 - Houston, TX
-
July 10-11, 2012 - Las Vegas, NV
-
October 30-31, 2012 - Chicago, IL
-
Advanced Process Hazard Analysis (PHA) for Team Leaders - 2
days ($995)
-
March 29-30, 2012 - Houston, TX
-
July 12-13, 2012 - Las Vegas, NV
-
November 1-2, 2012 - Chicago, IL
-
Process Hazard Analysis (PHA) for Team Members - 2 days
($995)
-
May 16-17, 2012 - Houston, TX
-
November 28-29, 2012 - Las Vegas, NV
top
Process Safety Management
(PSM) Training Courses
-
PSM Essentials - Boot Camp for Facility Personnel - 3 days
($1,495)
-
June 19-21, 2012, Houston
-
October 9-11, 2012, New Orleans
-
December 4-6, 2012, Houston
-
Understanding and Applying Human Factors for Process Safety
- 1 day ($595)
-
March 5, 2012 - Houston, TX
-
April 30, 2012 - Orlando, FL
-
July 23, 2012 - Chicago, IL
-
October 29, 2012 - Houston, TX
-
December 10, 2012 - Las Vegas, NV
-
Understanding and Applying Human Factors for Process Safety
- 1 day (International Deliveries)
See
Information on Pricing and Registration - International
as price varies based on location
-
March 18, 2012 - Doha, Qatar
-
May 14, 2012 - Kuala Lumpur, Malaysia
-
September 17, 2012 - Kuala Lumpur, Malaysia
-
December 10, 2012 - Singapore,
Singapore
-
Designing and Implementing a
Process Safety Management (PSM)
Program -
2 days ($995)
-
March 6-7, 2012 - Houston, TX
-
May 1-2, 2012 - Orlando, FL
-
July 24-25, 2012 - Chicago, IL
-
October 30-31, 2012 - Houston, TX
-
December 11-12, 2012 - Las Vegas, NV
-
Designing and Implementing a
Process Safety Management (PSM)
Program -
2 days (International Deliveries)
See
Information on Pricing and Registration - International
as price varies based on location
-
Auditing
Process Safety Management (PSM)
Programs - 2 days ($995)
-
March 8-9, 2012 - Houston, TX
-
May 3-4, 2012 - Orlando, FL
-
July 26-27, 2012 - Chicago, IL
-
November 1-2, 2012 - Houston, TX
-
December 13-14, 2012 - Las Vegas, NV
-
Auditing
Process Safety Management (PSM) Programs - 2 days
(International Deliveries)
See
Information on Pricing and Registration - International
as price varies based on location
top
ISA 84
/ IEC 61511,
Layers of Protection Analysis (LOPA)
and Safety Integrity Level (SIL) Courses
-
Layers of Protection Analysis (LOPA) for
Process Safety Management (PSM)
-
3 days ($1,495)
-
February 22-24, 2012 - Houston, TX
-
April 10-12, 2012 - Houston, TX
-
June 12-14, 2012 - New Orleans, LA
-
September 25-27, 2012 - Chicago, IL
-
November 6-8, 2012 - Houston, TX
-
Layers of Protection Analysis (LOPA) for Process Safety
Management (PSM) - 3 days (International Deliveries)
See
Information on Pricing and Registration - International
as price varies based on location
-
March 19-21, 2012 - Doha, Qatar
-
May 1-3, 2012 - Amsterdam, Netherlands
-
September 18-20, 2012 - Kuala Lumpur, Malaysia
-
November 13-15, 2012 - London, UK
-
December 11-13, 2012 - Singapore,
Singapore
-
Using LOPA and Other SIL Determination Methods to Comply
with IEC 61511 and ISA 84 - 1 day (International Deliveries)
See
Information on Pricing and Registration - International
as price varies based on location
-
March 22, 2012 - Doha, Qatar
-
September 21, 2012 - Kuala Lumpur, Malaysia
-
November 16, 2012 - London, UK
-
December 14, 2012 - Singapore, Singapore
-
Using
LOPAWorks Software - 1 day ($645)
-
April 13, 2012 - Houston, TX
-
June 15, 2012 - New Orleans, LA
-
September 28, 2012 - Chicago, IL
-
November 9, 2012 - Houston, TX
-
Using
LOPAWorks Software - 1 day (International Deliveries)
See
Information on Pricing and Registration - International
as price varies based on location
-
Understanding IEC 61511 / ISA 84 and
Developing a Safety Requirements Specification
- 1 day ($595)
-
April 17, 2012 - Houston, TX
-
October 2, 2012 - Chicago, IL
-
Understanding IEC 61511 / ISA 84 and
Developing a Safety Requirements Specification
- 1 day (International Deliveries)
See
Information on Pricing and Registration - International
as price varies based on location
-
Safety Integrity Level (SIL) Verification
for Safety Instrumented Systems -
3 days ($1,795)
-
April 18-20, 2012 - Houston, TX
-
October 3-5, 2012 - Chicago, IL
-
Safety Integrity Level (SIL) Verification
for Safety Instrumented Systems -
4 days (International Deliveries)
See
Information on Pricing and Registration - International
as price varies based on location
top
Software Courses
-
PHAWorks
Software Training - 1.5 days ($1,245)
-
March 13-14, 2012 - Houston, TX
-
August 7-8, 2012 - Houston, TX
-
October 16-17, 2012 - Chicago, IL
-
December 12-13, 2012 - Houston, TX
-
Using Tracker Software - 3 days ($1,795)
-
March 21-23, 2012 - Columbus, OH
-
August 15-17, 2012 - Columbus, OH
-
October 24-26, 2012 - Columbus, OH
-
December 18-20, 2012 - Columbus, OH
-
Using
LOPAWorks Software - 1 day ($645)
-
April 13, 2012 - Houston, TX
-
June 15, 2012 - New Orleans, LA
-
September 28, 2012 - Chicago, IL
-
November 9, 2012 - Houston, TX
-
Using
LOPAWorks Software - 1 day (International Deliveries)
See
Information on Pricing and Registration - International
as price varies based on location
top
Job
Safety Analysis / Procedure Writing Courses
-
Job Hazard / Safety Analysis - Assessing
Workplace Hazards - 1 day
($595)
-
April 16, 2012 - Houston, TX
-
August 20, 2012 - Las Vegas, NV
-
October 8, 2012 - Houston, TX
-
Job Hazard / Safety Analysis - Assessing
Workplace Hazards - 1 day
(International Deliveries)
See
Information on Pricing and Registration - International
as price varies based on location
-
Principles of Procedure Writing - 2 days ($995)
-
April 17-18, 2012 - Houston, TX
-
August 21-22, 2012 - Las Vegas, NV
-
October 9-10, 2012 - Houston, TX
-
Advanced
Procedure Writing - 2 days ($995)
-
April 19-20, 2012 - Houston, TX
-
August 23-24, 2012 - Las Vegas, NV
-
October 11-12, 2012 - Houston, TX
top
Management of Change (MOC) and Mechanical
Integrity
(MI) Courses
-
Management of Change (MOC) for Process Safety - 1 day ($595)
-
March 26, 2012 - Houston, TX
-
June 5, 2012 - New Orleans, LA
-
August 7, 2012 - Houston, TX
-
November 6, 2012 - Las Vegas, NV
-
Management of Change (MOC) for Process Safety - 1 day
(International Deliveries)
See
Information on Pricing and Registration - International
as price varies based on location
-
Mechanical Integrity
(MI) for Process Safety and Risk
Management - 3 day ($1,495)
-
March 27-29, 2012 - Houston, TX
-
June 6-8, 2012 - New Orleans, LA
-
August 8-10, 2012 - Houston, TX
-
November 7-9, 2012 - Las Vegas, NV
-
Mechanical Integrity
(MI) for Process Safety and Risk Management - 3 day
(International Deliveries)
See
Information on Pricing and Registration - International
as price varies based on location
top
Cyber Security Courses
-
Understanding and Applying Cyber Security for Manufacturing
and Computer Control Systems - 2 days ($995)
-
February 14-15, 2012 - Washington, D.C.
-
May 8-9, 2012 - Atlanta, GA
-
September 25-26, 2012 - Houston, TX
-
Cyber Security Vulnerability Analysis for Manufacturing and
Computer Control Systems - 2 days ($995)
-
February 16-17, 2012 - Washington, D.C.
-
May 10-11, 2012 - Atlanta, GA
-
September 27-28, 2012 - Houston, TX
top
Human Factors
and Human Errors Courses
top
Courses
Offered for In-House Delivery Only
Process Hazard Analysis (PHA) Training
Risk
Management Program (RMP) Training
Process
Security Training
Other
Technical Training
Courses delivered in-house can be customized
to include your specific process examples and drawings.
top |
|
|
|
|
