|
Advanced Process Hazard Analysis (PHA) for Team Leaders
Click Here For Special
Software and Training Offers
Course Description
The OSHA PSM and EPA RMP regulations are performance-based.
They anticipate that performance standards will evolve and improve over time.
The regulations require compliance with good engineering practices. Over the
past few years, a number of approaches that go beyond the basics of classical
PHA have been developed, documented and applied. Companies should consider
implementing these approaches to ensure compliance with the regulations and the
management of risk.
This course goes beyond the fundamentals of facilitating the
performance of PHA covered in the course "PHA for Team Leaders" and
deals with more advanced issues including the use of PHA to analyze in detail
the hazards of batch processes, procedures, control systems, and reactive
chemicals, and to help meet the requirements of the ANSI/ISA S84.01 standard on
safety instrumented systems.
The course explains how HAZOP, What-If and other PHA methods
can be used to identify the potential for errors in executing operating,
maintenance and other procedures. The application of these methods to batch
procedures and processes is also explained. PHA techniques that can be used to
analyze the hazards of process control systems explicitly are also described.
This provides a more detailed description of control systems hazards than is
possible with classical PHA. OSHA has announced its intent to revise the PSM
standard to better address the hazards of reactive chemicals. The Chemical
Safety Board has also recommended that both OSHA and EPA include reactive
chemicals in their process safety and risk management regulations. This course
covers approaches for addressing the hazards of reactive chemicals in PHA. OSHA
also expects companies to comply with the S84 standard and the course explains
how PHA can be used to help accomplish this objective.
Examples are provided of the application of the PHA
approaches described and attendees participate in workshop sessions to gain
experience using them.
This course was developed for those who have received formal
PHA training and experienced PHA Team Leaders and participants. An understanding
of PHA regulatory requirements and experience or formal training as a PHA team
leader is necessary to be successful in this course.
Objective
To learn about advanced subjects
in Process Hazard Analysis that should be considered by PHA study teams.
Target Audience
Those who have received formal PHA training; PHA Team Leaders
and participants; PSM coordinators.
Prerequisite
Primatech's PHA Principles and/or PHA for Team Leaders training
course (or equivalent).
Course Contents
-
PHA for Batch Processes
-
PHA for Procedures
-
S84 Standard and Layers of Protection Analysis (LOPA)
-
LOPA and PHA
-
Overview of Reactive Chemical Hazards
-
Identifying Reactive Chemical Hazards
-
Reactive Chemicals in PHA
-
Failure Characteristics of Control Systems
-
PHA for Control Systems
-
Major Hazards Analysis
Duration / CEUs / ABIH
Tuition
See
Information on Pricing and Registration - USA for pricing and registration
information.
|
|
|
For more information
about training courses, contact us at
training@primatech.com, by fax at
1-614-841-9805 (any time), or call us at 1-614-841-9800.
|
Brochures / Information Request
For more information, please
contact our Manager of Training Services at
614-841-9800 or via email at
training@primatech.com.
Training
Discount Offers
Attend both of these courses in the same week
for a total cost of $1,600 (savings of $390). Normal price would
be $995 per course or $1,990. For more information and
additional training discount offers,
see
Information on Pricing and Registration - USA
and Training/Software
Promotions.
Upcoming Training Courses
(By Month)
September (USA Deliveries)
October (USA Deliveries)
-
Job Hazard / Safety Analysis - Assessing
Workplace Hazards - 1 day
($595) - October 4, Houston, TX
-
Principles of Procedure Writing - 2 days
($995) - October 5-6, Houston, TX
-
Advanced Procedure Writing - 2 days
($995) - October 7-8, Houston, TX
-
Process Hazard Analysis (PHA) for Team Members - 2 days
($995) -
October 12-13, Houston, TX
-
Understanding and Applying Human Factors for Process Safety
- 1 day ($595) - October 25, Houston, TX
-
Process Hazard Analysis (PHA)
for Team Leaders - 5 days ($2,995) - October 25-29, New Orleans, LA
-
Designing and Implementing a
Process Safety Management (PSM)
Program -
2 days ($995) - October 26-27, Houston, TX
-
Auditing
Process Safety Management (PSM)
Programs - 2 days ($995) - October 28-29, Houston, TX
October/November (International Deliveries)
Training Courses (By Title)
Process Hazard Analysis (PHA) for Team Leaders
top
Process Hazard Analysis (PHA) Training
Courses
|
|
|
|
|
